3PAR InForm® OS 2.2.4 CLI Administrator's Manual (320-200113 Rev A, March 2009)

10.5
Physical Disk Capacity
InForm OS Version 2.2.4 3PAR InForm OS CLI Administrator’s Manual
 State - The state of the physical disk. The following disk states can appear:
 valid - The disk is valid.
 invalid - The disk has an invalid label.
 missing - The disk is marked as missing.
 notready - The disk is not ready for use.
 new - The disk is new and must be admitted before it can be used.
 failed - The disk has failed.
 invdrvtp - The disk type is invalid.
 indrvfw - The disk’s firmware is invalid.
 indrvcp - The reported disk size does not match the SCSI database.
 invblksz - The disk’s block size is not 512 bytes.
 invcage - The drive cage is invalid.
 TotalCap - The disk’s total capacity.
 SpareCap - The disk’s spare capacity.
 FreeCap - The disk’s free space capacity.
 FailedCap - The disk’s failed capacity.
10.3.2 Determining Physical Disk Capacity by Device Type
X To display the capacity for a system’s Fibre Channel physical disks, issue the
showpd -space -devtype FC command.
X To display the capacity for a system’s Near Line physical disks, issue the
showpd -space -devtype NL command.
NOTE: The output for each of the commands listed below is displayed in the same
format as the
showpd -space command output example in 10.3.1 Determining
Total Physical Disk Capacity on page 10.4.