3PAR InForm® OS 2.2.4 CLI Administrator's Manual (320-200113 Rev A, March 2009)

5.9
Hosts and Domains
InForm OS Version 2.2.4 3PAR InForm OS CLI Administrator’s Manual
 5.4.2 Adding Fiber Channel Path WWNs on page 5.6.
 5.4.3 Adding iSCSI Path iSCSI Names on page 5.6.
 5.4.4 Removing Fibre Channel Path WWNs on page 5.6.
 5.4.5 Removing iSCSI Path iSCSI Names on page 5.6.
 By adding or removing iSCSI CHAP authentication information. This operation is restricted
to super or edit level user in the
all domain (refer to the InForm OS Concepts Guide for
details about this restriction). See the following for instructions:
 5.4.6 Configuring iSCSI CHAP Authentication Information on page 5.7
 5.4.7 Removing iSCSI CHAP Authentication Information on page 5.7
5.6.3 Setting a Domain-Specific Host’s Port Persona
You must be a super or edit level user in the all domain or an edit level user in a specified
domain in order to perform this operation (refer to the InForm OS Concepts Guide for details
about this restriction).
X To set a domain-specific host’s port persona, see 5.3 Setting the Port Persona on page 5.3.
5.6.4 Changing a Host’s Domain
This operation is restricted to super or edit level user in the all domain (refer to the InForm
OS Concepts Guide for details about this restriction).
For information about changing a host’s domain association, see 6.6 Managing Domain
Objects on page 6.4.