3PAR InForm® OS 2.2.4 CLI Administrator's Manual (320-200113 Rev A, March 2009)

5.5
Modifying a Host
InForm OS Version 2.2.4 3PAR InForm OS CLI Administrator’s Manual
X To set a target port’s persona setting, issue the controlport persona <persona_val>
<N:S:P>
command, where:
 <persona_val> is the persona number (as described in Table 5-1).
 <N:S:P> is the port location.
For complete details about the
controlport persona command and arguments that can
be optionally specified, see the InForm OS Command Line Interface Reference.
5.4 Modifying a Host
Any existing host can be modified as follows:
 Changing the host’s name.
 Addition or removal of WWNs or iSCSI names.
 Addition or removal of iSCSI CHAP authentication information.
5.4.1 Changing a Host Name
X To change a host name, issue the sethost -name <new_host_name> <host_name>
command, where:
 <new_host_name> is the new name you wish to assign to the existing host.
18 Generic Generic Data
ONTAP®
0 Direct connect (DC)
19 Generic Generic Data
ONTAP®
0 Fabric attached (FA)
NOTE: This list of persona numbers may be expanded in the future. To see all the
personas currently available, use the
controlport -h command to display the
help for this command.
Table 5-1. Port Persona Settings (continued)
Persona number Vendor Adapter type OS Level Connection