3PAR InForm Management Console 4.1.0 Release Notes (320-200236 Rev A, May 2010)

8
InForm Management Console 4.1.0 Release Notes
53017 The Remote Copy Navigation Tree
Synchronous node or Periodic
node does not display the failover
state correctly for SLD Remote
Copy configurations
In an SLD Remote Copy configuration, if groups
are in the failover state, the Groups node on the
navigation tree displays the group correctly, but
the Synchronous node does not. It should display
the relationship between the two original
secondary systems, but it displays the original
source and backup relationship.
Workaround: Check information using the
Groups navigation tree node.
53183 The Virtual Volumes table does
not update when table filter is
on.
The Virtual volume table does not update when
table filter is on, and the tree table data may be
incorrect even after the filter is removed.
Workaround: Right-click the navigation tree
and open a new display window.
53263 Adding VVs to SLD Remote Copy
groups fail to account for
snapshot promotions on the
secondary while trying to restart
groups.
There are some instances where a group cannot
be started because other operations are in
progress. If you see the error, the volume is
currently being promoted.
Workaround: Try again after the promotion
task finishes.
53473 Remote Copy groups may fail to
start automatically after a Switch
Failover operation.
When performing a Switch Failover operation in
an SLD Remote Copy configuration, the groups
may not be able to start themselves after the
Switch Failover operation due to volumes being
promoted. You may need to manually start the
groups at a later time when the promote is
done.
Workaround: Start the group manually at a
later time when the promote is done.