3PAR InForm Management Console 4.1.0 Release Notes (320-200236 Rev A, May 2010)

10
InForm Management Console 4.1.0 Release Notes
53658 An RCIP port Connected Device
becomes empty when updated
events are received.
After receiving updated events, the Connected
Device column in the RC Ports or Systems
Ports Summary tabs may show -- when the
port is actually connected to a device.
Workaround: Select another tab and then
navigate back.
53664 After removing an RCFC link, the
link cannot be recreated.
You may not be able to draw a link in the
Create Link dialog box if the dialog is invoked
by right clicking in the link table.
Workaround: Invoke the Create Link dialog
box from the navigation tree.
53672 The sync state is incorrect when a
SLD Remote Copy configuration is
in DR Failover state and the links
are down.
When the link between the primary and
secondary servers is down in a SLD Remote Copy
configuration and a Failover operation is
performed, the sync state of the volumes in the
groups that have been failed over will be
displayed as Stopped, when in reality they are
Syncing or Synced. The IMC is not able to match
the appropriate target and displays the data
from the wrong target.
Workaround: Use the CLI to see if the groups
are synced.
53796 An exception occurs when
opening the Add to
Configuration or Create
Remote Copy Target wizards on
Linux platforms.
When the Add to Configuration or Create
Remote Copy Target wizards are launched on
Linux, the wizards appear not fully painted due
to an exception. You can still assign the system
and then move the mouse over the buttons area
at the bottom of the dialog to repaint the
buttons. You can then click Next and continue
to finish the wizards with no further issues.
Workaround: None.