3PAR AIX Implementation Guide (320-200187, June 2011)

3PAR AIX 5.3, 6.1, and 7.1 Implementation Guide
5.1
Removing 3PAR Devices on an AIX Host Server
3PAR Confidential
5
Removing 3PAR Devices on
an AIX Host Server
In this chapter
5.1 Removing Fibre Channel Connected Devices on the Host 5.2
5.2 Removing Fibre Channel Devices on the InServ Storage Server 5.3
This chapter explains how to remove the InServ storage server VVs from the AIX host server.
Before physically disconnecting cables from the host or InServ Storage Server, remove the VVs
from each device in the following sequence:
1 AIX Host Server
2 InServ Storage Server
NOTE: Performing a clean removal in this fashion insures the hdisk entry is
removed from the AIX device data base so that if another LUN is exported in the
future with the same LUN and characteristics, a device mismatch does not occur
on the AIX host.