3PAR AIX Implementation Guide (320-200187, June 2011)

2
Table of Contents
3PAR Confidential
3PAR AIX 5.3, 6.1, and 7.1 Implementation Guide
2.4 Setting Up and Zoning the Fabric 2.8
2.4.1 Configuration Guidelines For Fabric Vendors 2.9
2.4.2 Target Port Limitations and Specifications 2.10
2.4.3 Configuration Diagrams for Zoning 2.11
2.4.3.1 Single Initiator to Single Target Zoning No Fan-In No Fan-Out 2.11
2.4.3.2 Single Initiator to Single Target Zoning with Fan-Out from One
InServ Storage Server Port to Multiple Host Server Ports
2.12
2.4.3.3 Single Initiator to Single Target Zoning with Fan-In from Multiple
InServ Storage Server Ports to One Host Server Port
2.13
2.4.3.4 Single Initiator to Single Target Zoning with Mixed Fan-In and Fan-Out
Configurations
2.14
2.4.3.5 Non-Compliant Zoning Examples 2.15
2.4.4 Target Port Limits and Specifications 2.16
3 Connecting the Host Server with Fibre Channel
3.1 Checking the Host Server for the Current OS Version 3.2
3.2 Installing the IBM Fibre Channel HBA 3.2
3.2.1 Setting up the IBM Fibre Channel HBA for use with the InServ 3.2
3.2.2 Displaying Firmware and Driver Versions for the IBM HBA 3.3
3.2.3 Displaying the IBM HBA WWNs 3.4
3.2.4 Detecting Auto Topology 3.4
3.2.5 Setting host HBA Parameters DynamicTracking and FastFail 3.4
3.3 Installing 3PAR MPIO on the AIX Server (Local Boot Internal) 3.5
3.3.1 Installing 3PAR MPIO for AIX 3.5
3.3.2 Displaying the Path Status After Installing 3PAR MPIO 3.6
3.3.3 Additional 3PAR MPIO Settings 3.7
3.3.4 Additional Modules Available with 3PAR MPIO for AIX 3.8
3.4 Installing Veritas as the Multipathing Solution 3.8
3.4.1 Installing the 3PARODM for use with Veritas 3.8
3.4.2 Installing the Veritas DMP Multipathing Modules 3.10
3.4.3 Configuring the Veritas DMP Multipathing 3.10