3PAR AIX Implementation Guide (320-200187, June 2011)

2.11
Setting Up and Zoning the Fabric
3PAR AIX 5.3, 6.1, and 7.1 Implementation Guide
3PAR Confidential
2.4.3 Configuration Diagrams for Zoning
This section describes various zoning configurations.
2.4.3.1 Single Initiator to Single Target Zoning No Fan-In No Fan-Out
With a single initiator to single target zoning, in a no fan-in, no fan-out configuration, each
HBA port is connected to only one InServ Storage Server port, as shown in Figure 2-1.
Figure 2-1. Single Initiator to Single Target Zoning No Fan-In/No Fan-Out
0004_IG_R1
Node 0 Node 1
Host Server A Host Server B
InServ
Fabric
Fabric
A single initiator to
a single target in a zone
to target port
(InServ)
to initiator port
(host)
port
port
Z