Readme: 3PAR Multipath I/O 2.2 for IBM AIX (June 2013)

Page 7
320-1405-03 3PAR MPIO for IBM AIX November 2007
Change device
reserve_policy
1. Execute smit mpio.
2. Select MPIO Device Management > Change/Show MPIO Device
Characteristics.
3. Select the Device Name by pressing F4.
4. Move the cursor to the Reservation Policy attribute.
5. Press F4 to select preferred reservation policy
6. Press Enter.
Change device
hcheck_interval
1. Execute
smit mpio.
2. Select MPIO Device Management > Change/Show MPIO Device
Characteristics.
3. Select the Device Name by pressing F4.
4. Move the cursor to the HealthCheck Interval 0-3600 sec attribute.
5. Type in the preferred interval in seconds.
6. Press Enter.
Change device
max_transfer
1. Execute smit mpio.
2. Select MPIO Device Management > Change/Show MPIO Device
Characteristics.
3. Select the Device Name by pressing F4.
4. Move the cursor to the Max Transfer Size attribute.
5. Press F4 to select the preferred value.
6. Press Enter.
NOTE: The device must be in Defined state in order to change this
attribute.
NOTE: To learn more about SMIT, issue
smit and select Using SMIT (information only) from
the SMIT main menu.