HP 3PAR VMware ESX Implementation Guide

Figure 2 CHAP Credentials in ESX/ESXi 4.x or ESXi 5.x
3. Enter the CHAP Secret.
NOTE: Use the same CHAP secret on both the ESX host and the HP 3PAR StoreServ Storage.
4. Click OK. A warning screen appears indicating that a reboot of the ESX host is required.
NOTE: A server reboot is required for ESX 3.5 (see Figure 3 (page 20)). For ESX 4.x and
ESXi 5.x, reboot your host or remove and then re-add your iSCSI sessions with either the
esxcli iscsi session or the vicfg-iscsi command, depending on your ESX version.
Software iSCSI Support 19