HP 3PAR SmartStart 1.2.1 Software Release Notes (QR482-96499)

This document provides the release notes for HP 3PAR SmartStart software. HP 3PAR SmartStart is a
single startup tool that enables effortless setup of the HP 3PAR StoreServ 7000 Storage system.
SmartStart guides you through configuring all the required components for starting up the HP 3PAR
StoreServ 7000 Storage platform.
To obtain a copy of this documentation, go to the HP 3PAR StoreServ Storage site and click the Support
link for your product:
http://www.hp.com/go/3par
1.1 Features
SmartStart guides you through:
• Setting up the HP 3PAR Service Processor
• Initializing the HP 3PAR StoreServ 7000 Storage system
• Configuring application hosts
• Creating basic storage
• Installing the HP 3PAR Management Console
• The SmartStart software and online help now provide support in the Japanese language
1.2 Modifications to HP 3PAR SmartStart
The following items have been addressed in this release.
DescriptionItemIssue ID
When configuring storage in SmartStart, in the Add Virtual Volumes wizard,
discovered disks are not listed in order. Disks were listed by name and
should be listed by number. This issue is resolved in SmartStart 1.2.1.
SmartStart does not show
discovered disks in order.
80223
When the ENTER key was used on a SmartStart wizard window, default
was set to either Next or Prev buttons. The ENTER key default is now set
to OK on all wizards. This issue is resolved in SmartStart 1.2.1.
In wizards, typing ENTER produces
different results.
80406
When configuring storage in SmartStart, in the Add Virtual Volumes wizard,
while initializing and mounting is processing, the Next and Finish buttons
The Add Virtual Volumes wizard
pages should have grayed buttons
80745
are enabled. These buttons should be disabled until the process is complete.
This issue is resolved in SmartStart 1.2.1.
when initialize and mount device is
active.
When configuring hosts in SmartStart 1.2, in the Connect to Fibre Channel
host systems wizard, a misspelling appears when the error message
displays. This issue is resolved in SmartStart 1.2.1.
SmartStart misspelling error
message
87808
Product & File version in the SmartStart.exe were not correct. This issue is
resolved in SmartStart 1.2.1.
SmartStart 1.2 exe file properties
needed to be updated.
88294
In SmartStart 1.2, after installation of Host Explorer is complete, the Install
button becomes disabled. If the user clicks Next, then Back, the Install
SmartStart enables Install button
again on Host Explorer step even
when the installation was successful.
88151
button is enabled. The Install button should say disabled after installation
in complete issue is resolved in SmartStart 1.2.1.
In SmartStart 1.2, folders on a remote host are not validated correctly if
the names of the folders contain consecutive spaces. This issue is resolved
in SmartStart 1.2.1.
SmartStart fails validate remote
folder names with multiple blank
spaces.
88779
In SmartStart 1.2, when using shortcut keys, menus did not open. This issue
is resolved in SmartStart 1.2.1.
Keyboard shortcut keys such as
Alt+F (File menu) and Alt+H (Help
menu) did not work.
88903
In SmartStart 1.2, when starting the application from a CD, it takes two
minutes or more to begin loading. The issue was addressed in 1.2.1: a
SmartStart takes too long to start.90133
1.1 Features 3