3PAR InServ® E-Class/F-Class Storage Server Physical Planning Manual (320 - 200120 Rev F, September 2010)

6.8
3PAR InServ E-Class/F-Class Storage Server Physical Planning Manual
6.3.2 F-Class Controller Node
As shown in Figure 6-5, for the F-Class node, there is one onboard controller slot (slot 2), which
holds four Fibre Channel SFPs.
In addition, there are two controller slots (slots 0 and 1) to hold a maximum of two PCI
adapters each for dual-port Fibre Channel and iSCSI connections.
Figure 6-5. Controller Node Ports for the F-Class
A Fibre Channel or iSCSI adapter in slot 0 or 1 has two ports. PCI adapters assume the numbers
of the PCI slots they occupy. In dual-port adapters, ports are numbered 1 and 2, from top to
bottom. A Fibre Channel adapter in slot 2 has four ports, numbered 1 through 4 from right to
left.
0681_L_R2
Slot 0
FC / iSCSI
Slot 1
FC / iSCSI
Slot 2
FC
Ethernet
Port (E0)
Ethernet
Port (E1)
GigE GigE