3PAR InServ® E-Class/F-Class Storage Server Physical Planning Manual (320 - 200120 Rev F, September 2010)

4.8
3PAR InServ E-Class/F-Class Storage Server Physical Planning Manual
4.3.5 Anchoring Dimensions for InServ Storage Servers
Some installations may want to anchor InServ Storage Servers to the floor for better stability,
especially in seismically active locations. While 3PAR does not supply, or specifically recommend
any particular anchoring solution, there are several third-party anchoring kits that can be
procured for this purpose. Figure 4-4, Figure 4-5 and Figure 4-6 provide the required
dimensions for the base of the InServ Storage Server cabinet:
Figure 4-4. Front View Dimensions for the InServ Storage Server
Figure 4-5. Side View Dimensions for the InServ Storage Server
Leveler Foot (4X)
Caster (4X)
All Dimensions in Millimeters
0737_L_R1
0747_L_R1
Leveler Foot (4X)
Caster (4X)
All Dimensions in Millimeters