3PAR InServ® E-Class/F-Class Storage Server Physical Planning Manual (320 - 200120 Rev F, September 2010)

IX.2
Index
3PAR InServ E-Class/F-Class Storage Server Physical Planning Manual
structural requirements 4.4 to 4.6
H
humidity specifications for servers 2.17, 4.15
M
modem cables included with server 2.18, 6.17
modem connection configuration 6.24
N
NEMA L6-30 receptacle connectors 5.4
notes, about 4.12
notes, cautions, and warnings, explanation 1.5
numbering
power supplies 5.2
P
PDUs. See power distribution units (PDUs)
Power 5.5
power configuration
valid, example of 5.18
power distribution units (PDUs)
redundancy of 5.15
requirements for 5.3
power requirements
for servers 5.15
power supplies
location of 5.2
preinstallation planning 3.4
systems planning document 3.4
R
Radio Electronics Television Manufacturers
Association 7.7
rail spacing 7.7
raised flooring
examples of 4.5
specifications for 4.4
structural requirements 4.4 to 4.6
redundant power 5.15
requirements for 5.15
valid configuration 5.18
related documentation 1.2
requirements
access 4.12
cooling 4.15
electrical 5.4
structural 4.5
RETMA 7.7
spacing, definition 7.7
revision history RH.1
S
safety agency compliance notices A.2
safety precautions A.2
security, of servers A.2
serial connections
external, configuration of 6.18
service processor
connecting 6.24
site requirements for server installation 4.16
storage servers
access recommendations, physical 4.13
components
numbering of 5.3
current requirements 5.15
lithium battery replacement A.5
placement and security A.2
redundant power 5.15
requirements
cooling 4.15
current 5.15
electrical 5.4
installation site 4.16
security of A.2
weight and loads for 4.6
structural requirements, system 4.5
systems planning document 3.4
T
temperature specifications for servers 2.16, 4.14
TUV compliance A.2
U
UL® compliance A.2
V
vibration specifications for servers 4.14
voltage and frequency verification A.2