Basic Operation Guide 2013/06
Table Of Contents
- Switch Software
- Contents
- 1 Commands found in the Basic Operation Guide
- 2 Getting started
- 3 Using the Menu Interface
- 4 Using the Command Line Interface (CLI)
- Overview
- Accessing the CLI
- Using the CLI
- Return message types with CLI commands
- CLI interactive commands
- CLI control and editing
- 5 Using the HP WebAgent
- 6 Switch memory and configuration
- Overview
- Configuration file management
- Using the CLI to implement configuration changes
- Creating a custom default configuration
- Using the menu and WebAgent to implement configuration changes configuration file
- Zeroization
- Using Primary and Secondary flash image options
- Multiple configuration files
- Display configuration of selected interface
- Automatic configuration update with DHCP Option 66
- 7 Interface access and system information
- 8 Configuring IP addressing
- Overview
- IP configuration
- Loopback interfaces
- IP Preserve: retaining VLAN-1 IP addressing across configuration file downloads
- Configuring a single source IP address
- 9 Software management
- Downloading switch documentation and software from the web
- Viewing or downloading the software manual set
- Downloading software updates for your switch
- Software signing and verification
- Saving configurations while using the CLI
- Important: Best Practices for software updates
- Updating the switch: overview
- Updating the switch: detailed steps
- Rolling back switch software
- Viewing or transferring alternate configuration files
- Downloading switch documentation and software from the web
- Index
1 Commands found in the Basic Operation Guide
NOTE: Certain commands are not supported on all switch models.
Table 1 List of commands
PageCommand
41alias
14banner exec
11banner motd
135boot [system flash]
69boot set-default flash
51config
98console
83copy config
66copy flash
83copy tftp config
128copy tftp flash
130copy usb flash
129copy xmodem flash
92dhcp config-file-update
29enable
30end
81erase
67erase flash
29exit
71fastboot
103hostname
115interface loopback <number>
109ip address <ip-addr> <mask-bits>
109ip address <ip-addr>
/ <mask-length>
109ip address dhcp-bootp
111ip default-gateway <ip-addr>
118ip preserve
121ip source-interface
111ip ttl
100kill
103mac-age-time
7