Basic Operation Guide 2013/06
Table Of Contents
- Switch Software
- Contents
- 1 Commands found in the Basic Operation Guide
- 2 Getting started
- 3 Using the Menu Interface
- 4 Using the Command Line Interface (CLI)
- Overview
- Accessing the CLI
- Using the CLI
- Return message types with CLI commands
- CLI interactive commands
- CLI control and editing
- 5 Using the HP WebAgent
- 6 Switch memory and configuration
- Overview
- Configuration file management
- Using the CLI to implement configuration changes
- Creating a custom default configuration
- Using the menu and WebAgent to implement configuration changes configuration file
- Zeroization
- Using Primary and Secondary flash image options
- Multiple configuration files
- Display configuration of selected interface
- Automatic configuration update with DHCP Option 66
- 7 Interface access and system information
- 8 Configuring IP addressing
- Overview
- IP configuration
- Loopback interfaces
- IP Preserve: retaining VLAN-1 IP addressing across configuration file downloads
- Configuring a single source IP address
- 9 Software management
- Downloading switch documentation and software from the web
- Viewing or downloading the software manual set
- Downloading software updates for your switch
- Software signing and verification
- Saving configurations while using the CLI
- Important: Best Practices for software updates
- Updating the switch: overview
- Updating the switch: detailed steps
- Rolling back switch software
- Viewing or transferring alternate configuration files
- Downloading switch documentation and software from the web
- Index
Example 96 Detailed information displayed for each protocol
HP Switch(config)# show ip source-interface detail
Source-IP Detailed Information
Protocol : Tacacs
Admin Policy : Configured IP Interface
Oper Policy : Configured IP Interface
Source IP Interface : vlan 22
Source IP Address : 10.10.10.4
Source Interface State : Up
Protocol : Radius
Admin Policy : Configured IP Address
Oper Policy : Configured IP Address
Source IP Interface : vlan 3
Source IP Address : 10.10.10.2
Source Interface State : Up
Protocol : Syslog
Admin Policy : Configured IP Interface
Oper Policy : Configured IP Interface
Source IP Interface : vlan 10
Source IP Address : 10.10.10.10
Source Interface State : Up
Protocol : Telnet
Admin Policy : Configured IP Interface
Oper Policy : Configured IP Interface
Source IP Interface : loopback 1
Source IP Address : 10.10.10.11
Source Interface State : Up
Protocol : Tftp
Admin Policy : Outgoing Interface
Oper Policy : Outgoing Interface
Source IP Interface : N/A
Source IP Address : N/A
Source Interface State : N/A
Protocol : Sntp
Admin Policy : Outgoing Interface
Oper Policy : Outgoing Interface
Source IP Interface : N/A
Source IP Address : N/A
Source Interface State : N/A
Protocl : Sflow
Admin Policy : Outgoing Interface
Oper Policy : Outgoing Interface
Source IP Interface : N/A
Source IP Address : N/A
Source Interface State : N/A
The show command can also be used with the application to display the source IP address selection
information in effect for the application protocol.
Configuring a single source IP address 125