HP StorageWorks Fabric OS 6.1.2_cee1 release notes (5697-0045, June 2009)

Recommended versionEarliest compatible ver-
sion
Model
6.2.0g6.1.1bHP StorageWorks 48 Port 4-Gb Blade (FC4-
48)6.1.1b
6.2.0g6.1.1bHP StorageWorks 4/32B SAN Switch
6.2.0g6.1.0cHP StorageWorks DC SAN Director
6.2.0g6.2.0dHP StorageWorks DC04 SAN Director
6.2.0g6.2.0bBrocade 8Gb SAN Switch for HP BladeSystem c-
Class
6.2.0g6.2.0bHP StorageWorks EVA4400 embedded switch
module, 8Gb Brocade
6.2.0g6.1.0cHP StorageWorks SAN Director 16 Port 8-Gb FC
blade (FC8-16)
6.2.0g6.1.0cHP StorageWorks SAN Director 32 Port 8-Gb FC
blade (FC8-32)
6.2.0g6.1.0cHP StorageWorks SAN Director 48 Port 8-Gb FC
blade (FC8-48)
6.2.0g6.1.0cHP StorageWorks SAN Director 6 Port 10-Gb ISL
blade (FC10-6)
N/ANot supportedFabric Manager
10.1.310.0.2Data Center Fabric Manager
Fibre Channel Routing scalability
For the latest FCR scalability support information, see the HP StorageWorks SAN design reference
guide, available at:
http://www.hp.com/go/sandesignguide
Firmware upgrade instructions
IMPORTANT:
Firmware upgrade on the HP StorageWorks 2408 FCoE Converged Network Switch is accomplished
by executing the firmwaredownload command. Note that Hot Code Activation capability is not
supported on this switch in the Fabric OS 6.1.2_cee1 release. Any firmware upgrade operation from
Fabric OS 6.1.2_cee1 to a newer Fabric OS release will be disruptive to the traffic currently going
through the HP StorageWorks 2408 FCoE Converged Network Switch platform.
The HP StorageWorks 2408 FCoE Converged Network Switch comes from the factory with Fabric
OS 6.1.2_cee1 already installed. Should you need to access the Fabric OS 6.1.2_cee1 firmware,
configuration files, or MIB files, visit the HP website:
8