CLI Guide

CLI commands 8
Command Description
hpcnucli -iscsi -modifytcpip -static
Sets an iSCSI host's TCP/IP settings to be configured
manually
Example:
hpcnucli –iscsi <MAC address on iSCSI
host port> –modifytcpip –static <VLAN ID>
<IP address> <subnet mask> <gateway>
Login options
The hpcnucli -iscsi login options are as follows.
Login option Description
-mp
Multi-path, enabled by default
-hd
Header digest
-dd
Data digest
-option
Specified CHAP values, either mutual or one-way
Possible CHAP values:
•
[-Option (-mutualCHAP | -oneWayCHAP)]
•
[TargetCHAP]
•
[TargetSecret]
•
[InitiatorCHAP]
•
[InitiatorSecret]
FCoE subcommand properties
The hpcnucli -fcoe subcommand options are as follows.
Command Description
hpcnucli -fcoe -portinfo
Displays all the information related to an FCoE port that
you specify
Example:
hpcnucli –fcoe <portWWN of the FCoE adapter>
-portinfo
hpcnucli -fcoe -resetstat
Resets FCoE port statistic attribute values to 0
Example:
hpcnucli –fcoe <portWWN of the FCoE adapter>
-resetstat
hpcnucli -fcoe -getdcbinfo
Displays negotiated DCB information for a portWWN you
specify
Example:
hpcnucli –fcoe <portWWN of the FCoE adapter>
-getdcbinfo
hpcnucli -fcoe -getdcbconfig
Displays the current DCB admin configuration for a
portWWN you specify
Example:
hpcnucli –fcoe <portWWN of the FCoE adapter>
-getdcbconfig