CLI Guide

Introduction 4
Introduction
CLI overview
This document provides CLI guidelines for the CNU.
CLI commands catalogue
This document also provides CLI guidelines and usage for the iSCSI and FCoE subcommands.
Command line syntax
CLI input is case-insensitive, except when otherwise noted. The general CLI syntax format is as follows:
hpcnucli <[command] | [personality]> [<managed element>] [<options>
<parameters>]
Item Description
command
Operation performed
personality
Managed element personality, either
-iscsi
or
-fcoe
managed element
Optional managed element identifier
[iSCSI MAC / FCoE Port WWN]
This might be required by the personality
options
Commands performed on a managed element
parameters
Optional parameters used for managed element commands