Brocade Fabric OS Documentation Addendum v6.1.2_cee (53-1001216-01, June 2009)

Fabric OS Documentation Addendum 87
53-1001216-01
8000 switch view
5
• Right-click on a port, and select Port Details. A Port Details dialog box is displayed (Figure 4).
The information displayed is a subset of the information available on the General tab of the
Port Administration panel.
FIGURE 4 Port Details
Port information that is unique to FCoE
The General tab of the Port Administration panel shows several parameters that are unique to
FCoE interfaces:
• Interface Mode - For this release, the Interface Mode will always be L2.
• VLAN ID - The VLANs that carry traffic on the links attached to this port.
• LAG - The name of the Link Aggregation Group (LAG), with which this port is associated. If no
name is present, the port is not associated with any LAG.
• L2 Mode - The values are either Access or Trunk. Access mode allows only one VLAN
association, and allows only untagged frames. Trunk mode allows more than one VLAN
association, and allows tagged frames.
• CEE Map - The name of a CEE map that was created and associated with the port. If no value is
present, it indicates that the default CEE map is being used.
• Traffic Class Map - The name of a traffic class map that was created and associated with the
port. If no value is present, it indicates that the default traffic class map is being used.
• LLDP Status - Indicates if LLDP is active or inactive.
• LLDP Profile - The name of an LLDP profile that was created and associated with the port. If no
value is present, it indicates that LLDP is not implemented.
• FCoE Priority Bits - Each bit represents a user priority that is associated with FCoE traffic.
• Default CoS - The default Class of Service.