Brocade Fabric OS Documentation Addendum v6.1.2_cee (53-1001216-01, June 2009)

64 Fabric OS Documentation Addendum
53-1001216-01
New chapter, SSM System Messages
3
Recommended
Action
Check the traffic on the interface.
Severity INFO
New chapter, SSM System Messages
A new chapter titled SSM System Messages was added after the SS System Messages chapter and
before the SULB System Messages; it contains all the new messages for the new feature, System
Services Module.
SSMD-1001
Message <timestamp>, [SSMD-1001], <sequence-number>,, ERROR, <system-name>,Failed to
allocate memory: <function name>.
Probable Cause Indicates that the specified function has failed to allocate memory.
Recommended
Action
Check the memory usage on the switch using the memShow command.
Restart or power cycle the switch.
Severity ERROR
SSMD-1002
Message <timestamp>, [SSMD-1002], <sequence-number>,, ERROR, <system-name>,Failed to
initialize <module> rc = <error>.
Probable Cause Indicates that an initialization of a module within the SSM has failed.
Recommended
Action
Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS
Command Reference Manual for more information on this command.
Severity ERROR
SSMD-1003
Message <timestamp>, [SSMD-1003], <sequence-number>,, ERROR, <system-name>,Failed to lock
semaphore mutex: <function name>.
Probable Cause Indicates that the specified function has failed to lock the mutex (semaphore).
Recommended
Action
Restart or power cycle the switch.
Severity ERROR