Brocade Fabric OS Documentation Addendum v6.1.2_cee (53-1001216-01, June 2009)

26 Fabric OS Documentation Addendum
53-1001216-01
Notes
2
Notes
Add the following notes to the Notes section of the commands listed below and their associated
man pages:
portDisable
This command is not supported on FCoE ports. Use fcoe --disable.
portEnable
This command is not supported on FCoE ports. Use fcoe --enable.
PortCfg*
The Fabric OS port configuration commands are not supported on FcoE ports. Use fcoe --cfg to
configure FCoE ports.
portCfgSpeed
Speed configuration is not applicable to FcoE ports.
PortLoginShow
This command is not applicable to embedded FCoE ports. Use fcoeLoginShow.
PortShow
The portShow command displays FCoE ports with "Protocol: FCoE" and "portSpeed: 10Gbps". Use
fcoe --cfgshow and fcoe --loginshow to display FCoE-specific details.
switchCfgSpeed
Speed configuration is not applicable to FcoE ports.