Brocade Fabric OS Documentation Addendum v6.1.2_cee (53-1001216-01, June 2009)

Fabric OS Documentation Addendum 25

53-1001216-01

switchShow

The switchShow command should be modified as follows:

1. Add the following text to the Description section:

“On the Brocade 8000, the Proto column identifies the FCoE ports of the switch. For all FcoE

ports, the speed is 10 Gbps. The default configuration of an FCoE port in Fabric OS v6.1.2_cee

is an F_Port configuration. After a successful reboot SwitchShow displays all FCoE ports as

online. For each FCoE port, the FCoE controller WWN is shown.”

2. Add the following example to the Example section:

To display switch configuration information on the Brocade 8000:

switch:admin> switchshow

switchName: ras096

switchType: 76.4

switchState: Online

switchMode: Native

switchRole: Subordinate

switchDomain: 96

switchId: fffc60

switchWwn: 10:00:00:05:1e:76:12:80

zoning: ON (WB_DEFAULT_CFG_LSAN)

switchBeacon: OFF

Area Port Media Speed State Proto

=====================================

0 0 id N8 Online FC E-Port 10:00:00:05:1e:07:c7:26

"ras035____12345678901234567890"

1 1 id N8 Online FC E-Port 10:00:00:05:1e:07:c7:26

"ras035____12345678901234567890"

2 2 id 2G Online FC E-Port 10:00:00:05:1e:07:c7:26

"ras035____12345678901234567890"

3 3 id N8 Online FC LS E-Port 10:00:00:05:1e:07:c7:26

"ras035____12345678901234567890" (upstream)

4 4 id N4 Online FC F-Port 10:00:00:00:00:03:00:01

5 5 id N4 Online FC F-Port 10:00:00:00:00:01:00:01

6 6 id N4 Online FC F-Port 10:00:00:00:00:04:00:01

7 7 id N4 Online FC F-Port 10:00:00:00:00:02:00:01

8 8 -- 10 Online FCoE F-Port 20:08:00:05:1e:76:12:80

9 9 -- 10 Online FCoE F-Port 20:09:00:05:1e:76:12:80

10 10 -- 10 Online FCoE F-Port 20:0a:00:05:1e:76:12:80

11 11 -- 10 Online FCoE F-Port 20:0b:00:05:1e:76:12:80

12 12 -- 10 Online FCoE F-Port 20:0c:00:05:1e:76:12:80

13 13 -- 10 Online FCoE F-Port 20:0d:00:05:1e:76:12:80