Brocade Fabric OS Documentation Addendum v6.1.2_cee (53-1001216-01, June 2009)

Fabric OS Documentation Addendum 13

53-1001216-01

fcoeLoginCfg

Manages or displays the FCoE login configuration.

Synopsis fcoelogincfg --show [-switch swwn | -logingroup lgname] [-saved]] | [-mergestatus]

fcoelogincfg --save

fcoelogincfg --transshow

fcoelogincfg --transabort

fcoelogincfg --purge -conflicting [-non-existing]

fcoelogincfg --purge -non-existing [-conflicting]

fcoelogincfg --enable

fcoelogincfg --disable

Description Use this command to save, abort, or display the current FCoE login configuration, including ongoing

transactions and the effective (saved) configuration.

Operands This command has the following operands.

--help Displays command usage.

--show Displays the state of the FCoE login configuration including current

transactions and effective (saved) configuration.

-switch swwn Displays the login groups for the specified switch.

-logingroup lgname

Displays the login group configuration for the specified login group.

-saved Displays only the effective configuration.

-merge-status Displays the status of the last configuration merge during the last fabric

merge. This operand also displays conflicting login groups and login groups

for non-existing switches.

--save Saves and applies FCoE login configuration changes as the effective

configuration fabric-wide.

--transshow Displays the current configuration transaction in progress fabric-wide..

--transabort Aborts the FCoE login configuration transaction currently in progress.

--purge Purges the specified entries from the effective configuration. Specify one or

both of the following operands:

-conflicting Purges all conflicting login groups and conflicting VN_Port mappings from the

effective configuration.

-non-existing Purges all login groups for non-existing switches from the effective

configuration.

--enable Enables the FCoE login configuration management on the switch. This allows

only configured Enode VN_Ports to log in. Use the fcoeLoginGroup command

to configure allowed Enode VN_Ports.