Brocade Fabric OS Documentation Addendum v6.1.2_cee (53-1001216-01, June 2009)

10 Fabric OS Documentation Addendum
53-1001216-01
cmsh
2
TenGigabitEthernet 0/5 unassigned administratively down down
TenGigabitEthernet 0/6 unassigned administratively down down
TenGigabitEthernet 0/7 unassigned administratively down down
TenGigabitEthernet 0/8 unassigned administratively down down
TenGigabitEthernet 0/9 unassigned administratively down down
TenGigabitEthernet 0/10 unassigned administratively down down
TenGigabitEthernet 0/11 unassigned administratively down down
TenGigabitEthernet 0/12 unassigned administratively down down
TenGigabitEthernet 0/13 unassigned administratively down down
TenGigabitEthernet 0/14 unassigned administratively down down
TenGigabitEthernet 0/15 unassigned administratively down down
TenGigabitEthernet 0/16 unassigned administratively down down
TenGigabitEthernet 0/17 unassigned administratively down down
TenGigabitEthernet 0/18 unassigned administratively down down
TenGigabitEthernet 0/19 unassigned administratively down down
TenGigabitEthernet 0/20 unassigned administratively down down
TenGigabitEthernet 0/21 unassigned administratively down down
TenGigabitEthernet 0/22 unassigned administratively down down
TenGigabitEthernet 0/23 unassigned administratively down down
switch:admin>#exit
To create an FCoE VLAN:
switch:admin> cmsh
switch:admin>en
switch:admin>#conf t
switch:admin>(config)#protocol lldp
switch:admin>(conf-lldp)# advertise dcbx-fcoe-app-tlv
switch:admin>(conf-lldp)# advertise dcbx-fcoe-logical-link-tlv
switch:admin>(conf-lldp)#exit
switch:admin>(config)#exit
switch:admin>(config)# vlan classifier rule 1 proto fcoe encap ethv2
switch:admin>(config)# vlan classifier rule 2 proto fip encap ethv2
switch:admin>(config)# vlan classifier group 1 add rule 1
switch:admin>(config)# vlan classifier group 1 add rule 2
switch:admin>(config)#interface vlan 5
switch:admin>(conf-if-vl-5 )#fcf forward
switch:admin>(conf-if-vl-5 )exit
switch:admin>(config) # cee-map test
switch:admin>(config-cee-map) # priority-group-table 1 weight 40 pfc
switch:admin>(config-cee-map) # priority-group-table 2 weight 60
switch:admin>(config-cee-map) # priority-table 2 2 2 1 2 2 2 2
switch:admin>(config-cee-map) # exit
switch:admin>(config)#interface te 0/0
switch:admin>(config-if-te-0/0)#switchport
switch:admin>(config-if-te-0/0)#switchport mode access
switch:admin>(config-if-te-0/0)# vlan classifier activate group 1 vlan 5
switch:admin>(config-if-te-0/0)# cee test
switch:admin>(config-if-te-0/0)#no shutdown
switch:admin>(config-if-te-0/0)#exit
switch:admin>(config)#exit
switch:admin>#exit
See Also fcoe, fcoeLoginGroup, fcoeLoginGroup