Brocade Fabric OS Documentation Addendum v6.1.2_cee (53-1001216-01, June 2009)

112 Fabric OS Documentation Addendum
53-1001216-01
Configuring FCoE login groups
5
The New Login Group dialog box is displayed (Figure 26).
FIGURE 26 New Login Group dialog box
4. Type a name for the login group in the Login Group Name field.
5. Select the switch WWN, The choices are Self, which is the WWN of the switch you are logged
into, or Other Switch WWN. If you choose Other Switch WWN, you must type the WWN of that
switch in the provided field.
6. Under Login Member Configuration, choose either Allow All Members, or Allow Specific
Member.
If you choose Allow All Members, all devices attached to FCoE ports are allowed to log in to the
switch. Skip steps 7 and 8.
If you choose Allow Specific Member, you can control which devices can log in, using Member
Type, Member PWWN/MAC, and the Add and Remove buttons, as described in steps 7 and 8.
7. Se lect Model 2 as Member Type for an 8000 switch.
8. Type the port WWN in hexadecimal format in the Member PWWN/MAC field, and click ADD.
The WWN is displayed under Allowed Login Members. If you decide a member should not be on
the list, highlight the entry and click Remove.
9. Click OK.