Brocade Fabric OS Documentation Addendum v6.1.2_cee (53-1001216-01, June 2009)

110 Fabric OS Documentation Addendum

53-1001216-01

Configuring VLANs

The VLAN Configuration dialog box is displayed (Figure 24).

FIGURE 24 VLAN Configuration dialog box

4. Specify a VLAN ID. The format is VLAN<bridge number><ID>. In this Fabric OS release, no

bridge instances are supported, so the bridge number is always 0, and the value under Bridge

is statically defined as VLAN0. The <ID> is an integer from 1 to 3583, which must be typed in

the ID field.

5. Under the Selection List, click the plus sign next to the Interface and LAG folders, and select

individual interfaces and LAGs you want to associate with the VLAN ID.

6. Click Add to move the interfaces or LAGs to the Selected List.

Note the reminder that interfaces must be configured as L2, and that the interfaces or LAGs

must be in Trunk mode to be associated with multiple VLANs, and the Access mode interfaces

can be associated with only one VLAN.

7. Cl ick OK.

8. Repeat the procedure for additional VLANs.