Brocade Fabric OS Documentation Addendum v6.1.2_cee (53-1001216-01, June 2009)

Fabric OS Documentation Addendum 105

53-1001216-01

Configuring CEE interfaces

CEE interfaces are configured from the Port Administration panel.

1. Select the CEE Interfaces tab on the Port Administration panel.

2. Select the port you want to configure under the CEE Interfaces Explorer.

3. Select the General tab (Figure 19). Normally, this tab is pre-selected.

FIGURE 19 Port General tab

4. Select Edit Configuration.

The CEE Edit Configuration dialog box is displayed.