Brocade Fabric OS Documentation Addendum v6.1.2_cee (53-1001216-01, June 2009)

Fabric OS Documentation Addendum 99
53-1001216-01
Quality of Service (QoS) configuration
5
An entry is added to the Priority Group table (Figure 14). When you add an entry, a PGID is
automatically assigned. The PGID is an integer from 0 to 7. The first added entry is given a
PGID of 0, and the PGID increments by one for each additional added entry until a PGID of 7 is
reached.
FIGURE 14 Adding a Priority Group
8. Edit the Bandwidth entry to indicate the desired percentage of total bandwidth.
9. Change the Priority Flow Control Status to Enabled to enable PFC for the entry.
10. Click OK.
The new priority group is displayed in the Priority Group Map.
Adding a traffic class map
CoS priorities can be mapped to traffic classes using a traffic class map.
1. Select the CEE tab on the Switch Administration panel.
2. Select the QoS tab.
3. Select the Traffic Class Maps tab.
4. Select New.