Brocade Fabric OS Documentation Addendum v6.1.2_cee (53-1001216-01, June 2009)

96 Fabric OS Documentation Addendum

53-1001216-01

FC0E configuration tasks

There are several tasks related to FC0E configuration. The following lists the high level tasks in a

suggested order:

• Quality of Service (QoS) configuration (optional) - If you intend to implement a specific QoS

scheme to prioritize data traffic, it is recommended that you finish your QoS configuration

before you begin port configuration. QoS values are referenced when you configure ports.

• LLDP-DCBX configuration (optional) - If you intend to implement DCBX, it is recommended that

you finish LLDP-DCBX configuration before you configure ports. LLDP-DCBX values are

referenced when you configure ports.

• CEE interface configuration (mandatory).

• Link Aggregation Groups (LAG) configuration - Ports must be configured before they can be

placed into a LAG. Parameters that are applied individually to ports are applied collectively to

LAGs.

• VLAN configuration (optional) - Port and LAG names are referenced in VLAN configuration, and

must be defined before you can successfully complete a VLAN configuration.

• Login group configuration (optional) - Login group configuration is not dependent on any of the

above configurations. It can be done as a separate task.