Brocade Converged Enhanced Ethernet Command Reference v6.1.2_cee (53-1001217-01, June 2009)
50 Converged Enhanced Ethernet Command Reference
53-1001217-01
show vlan
3
show vlan
Displays information about a specific VLAN interface.
Synopsis show vlan {vlan_id | brief |classifier | fcoe}
Operands vlan_id Specifies the VLAN interface to display. The range of valid values is 1-3583.
brief Specifies to display VLAN information for all interfaces including static and
dynamic.
classifier Specifies to display all VLAN classification information.
fcoe Specifies to display all FCoe VLAN interfaces.
Defaults There are no default configurations for this command.
Command
Modes
Privileged EXEC Mode
Description Use this command to display information about VLANs. If this command is used without specifying
a specific VLAN, all VLANs are shown.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To show information on all VLANs:
switch#show vlan
See Also none