Brocade Converged Enhanced Ethernet Command Reference v6.1.2_cee (53-1001217-01, June 2009)

Converged Enhanced Ethernet Command Reference 49

53-1001217-01

show interface vlan

Displays the status of the specified VLAN.

Synopsis show interface vlan vlan_id

Operands vlan_id Specifies the VLAN interface to display. The range of valid values is 1-3583.

Defaults There are no default configurations for this command.

Command

Modes

Privileged EXEC Mode

Description Use this command to display the administrative and operational status of all or a specified VLAN

interface.

Usage

Guidelines

There are no usage guidelines for this command.

Examples To display the status for VLAN 1:

switch-cmsh#show interface vlan 1

Vlan 1 is up, line protocol is up

Address is 0042.0e70.0001, Current address is 0042.0e70.0001

Interface index (ifindex) is 268435457

MTU 2500 bytes

LineSpeed: 10000 Mbit

Last clearing of show interface counters 5d22h35m

Queueing strategy: fifo

Receive Statistics:

142604023 packets, 9133347506 bytes

Unicasts: 28725, Multicasts: 142570704, Broadcasts: 4594

64-byte pkts: 142560528, Over 64-byte pkts: 32422, Over 127-byte pkts: 2972

Over 255-byte pkts: 1167, Over 511-byte pkts: 6848, Over 1023-byte pkts: 86

Over 1518-byte pkts(Jumbo): 0

Runts: 0, Jabbers: 0, CRC: 0, Overruns: 0

Errors: 992629160, Discards: 0

Transmit Statistics:

69809 packets, 11563556 bytes

Unicasts: 32696, Multicasts: 32753, Broadcasts: 4360

Underruns: 0

Errors: 0, Discards: 358

Rate info (interval 299 seconds):

Input 177886 Mbits/sec, 347 packets/sec, 0.00% of line-rate

Output 350 Mbits/sec, 0 packets/sec, 0.00% of line-rate

Time since last interface status change: 19:06:00