Brocade Converged Enhanced Ethernet Command Reference v6.1.2_cee (53-1001217-01, June 2009)

40 Converged Enhanced Ethernet Command Reference

53-1001217-01

terminal length

Sets the number of lines to display on a screen.

Synopsis terminal length number

Operands number Specifies the number of lines to display on a screen. The range of valid values

is 0-512.

Defaults The default length is 24.

Command

Modes

Privileged EXEC Mode

Description Use this command to set the number of lines to display on the screen.

Usage

Guidelines

If 0 (zero), the switch does not pause between screens of output.

Examples To set the number of lines to display on the screen to 30:

switch# terminal length 30