Brocade Converged Enhanced Ethernet Command Reference v6.1.2_cee (53-1001217-01, June 2009)

Converged Enhanced Ethernet Command Reference 199

53-1001217-01

show qos queue interface

Displays the runtime state retrieved from the dataplane reflecting the number of packets and bytes

sent and received for each priority.

Synopsis show qos queue interface {tengigabitethernet slot/port | linecard slot | portset chip | all}

Operands tengigabitethernet Specifies the 10 Gbps Ethernet interface.

slot Specifies the 10 Gbps Ethernet interface linecard slot number.

port Specifies the 10 Gbps Ethernet interface port number within the

linecard.

linecard portset Reports QoS statistics for all 10 Gbps Ethernet interfaces within an

ASIC.

slot Specifies the ASIC linecard slot number within the chassis.

chip Specifies the ASIC number within the linecard.

all Reports QoS statistics for all 10 Gbps interfaces within the system.

Command

Modes

Exec Mode

Description Use this command to display the runtime state retrieved from the dataplane reflecting the number

of packets and bytes sent and received for each priority.

Usage

Guidelines

For a stand-alone switch, all ASICs are considered as slot number zero (0).

Examples To display the queueing information for a tengigabitethernet interface:

switch#show qos queue interface tengigabitethernet 0/2

Interface TenGigabitEthernet 0/2

RX RX TX TX

CoS Packets Bytes TC Packets Bytes

------------------------------- -------------------------------

0 680458 87098624 0 0 0

1 0 0 1 32318 0

2 0 0 2 0 0

3 0 0 3 0 0

4 0 0 4 0 0

5 0 0 5 0 0

6 0 0 6 0 0

7 0 0 7 0 0