Brocade Converged Enhanced Ethernet Command Reference v6.1.2_cee (53-1001217-01, June 2009)
Converged Enhanced Ethernet Command Reference 189
53-1001217-01
qos queue scheduler
11
qos queue scheduler
Configures the Traffic Class packet scheduler policy.
Synopsis qos queue scheduler strict-priority strict-priority number dwrr weight0 weight1 weight2 weight3
weight4 weight5 weight6 weight7
no qos queue scheduler
strict-priority Configures the Strict Priority Traffic Class policy. All Strict Priority
Traffic Classes are serviced before any DWRR Traffic Classes.
strict-priority number Sets the number of the Strict Priority Traffic Class. These are the
strict priority numberhighest Traffic Class, for example if the
strict-priority number is 3, then the Strict Priority Traffic Class
are Traffic Classes 7, 6, and 5. Therange of valid values is
0-8.
dwrr Configures the DWRR Traffic Class policy. There are a variable
number of DWRR weight values accepted that are dependent
on the setting of strict priority number. The strict priority number
plus the number of DWRR weight values must always sum to
8 Traffic Classes.
Operands weight0 Sets the DWRR weight for Traffic Class 0 in units of
bandwidth percentage left over after servicing all of the Strict
Priority Traffic Classes. The sum of all weight values must equal
100 percent. The weight0 value is only valid when the strict
priority number is less than 8. The range of valid values is
0-100 percent.
weight1 Sets the DWRR weight for Traffic Class 1 in units of
bandwidth percentage left over after servicing all of the Strict
Priority Traffic Classes. The sum of all weight values must equal
100 percent. The weight0 value is only valid when the strict
priority number is less than 7. The range of valid valuesis
0-100 percent.
weight2 Sets the DWRR weight for Traffic Class 2 in units of
bandwidth percentage left over after servicing all of the Strict
Priority Traffic Classes. The sum of all weight values must equal
100 percent. The weight0 value is only valid when the strict
priority number is less than 6. The range of valid values is
0-100 percent.
weight3 Sets the DWRR weight for Traffic Class 3 in units of
bandwidth percentage left over after servicing all of the Strict
Priority Traffic Classes. The sum of all weight values must equal
100 percent. The weight0 value is only valid when the strict
priority number is less than 5. The range of valid valuesis
0-100 percent.