Brocade Converged Enhanced Ethernet Command Reference v6.1.2_cee (53-1001217-01, June 2009)

162 Converged Enhanced Ethernet Command Reference

53-1001217-01

spanning-tree priority

Changes an interface's spanning-tree port priority.

Synopsis spanning-tree priority priority

no spanning-tree priority priority

Operands priority Specifies the interface priority for the spanning tree. The range of valid values

is 0-240. Port priority is in increments of 16.

Defaults The default value is 128.

Command

Modes

Interface Configuration Mode

Description Use this command to change an interface's spanning-tree port priority. Use the no spanning-tree

priority command to return to the default setting.

Usage

Guidelines

There are no usage guidelines for this command.

Examples To configure the port priority to 16:

switch(conf-if-te-0/1)#spanning-tree priority 16

See Also spanning-tree cost, show spanning-tree