Brocade Converged Enhanced Ethernet Command Reference v6.1.2_cee (53-1001217-01, June 2009)

160 Converged Enhanced Ethernet Command Reference

53-1001217-01

spanning-tree link-type

Enables and disables the rapid transition for the Spanning Tree Protocol.

Synopsis spanning-tree link-type [point-to-point | shared]

no spanning-tree link-type

Operands point-to-point Enables rapid transition.

shared Disables rapid transition.

Defaults The default is point-to-point.

Command

Modes

Interface Configuration Mode

Description Use this command to specify a link type for the Spanning Tree Protocol.

Usage

Guidelines

This command overrides the default setting of the link type.

Examples To specify the link type as shared:

switch(conf-if-te-0/0)#spanning-tree link-type shared

See Also spanning-tree link-type shared, no spanning-tree link-type