Brocade Converged Enhanced Ethernet Command Reference v6.1.2_cee (53-1001217-01, June 2009)

138 Converged Enhanced Ethernet Command Reference

53-1001217-01

port-channel path-cost

Sets the path-cost behavior.

Synopsis port-channel path-cost custom | standard

Operands custom Specifies to use the custom behavior, which sets the path-cost changes

according to the port-channel’s bandwidth.

standard Specifies to use the standard behavior, which sets that the path-cost does not

change according to port-channel’s bandwidth.

Defaults The default path-cost is standard.

Command

Modes

Protocol Spanning Tree Mode

Description Use this command to set the path-cost behavior for the port-channel.

Usage

Guidelines

There are no usage guidelines for this command.

Examples To set the behavior for the path-cost to custom:

switch(conf-mstp)#port-channel path-cost custom

To set the behavior for the path-cost to standard:

switch(conf-mstp)#port-channel path-cost standard