Brocade Converged Enhanced Ethernet Command Reference v6.1.2_cee (53-1001217-01, June 2009)

Converged Enhanced Ethernet Command Reference 125

53-1001217-01

show mac access-group

Displays the current MAC ACL mapping to interfaces.

Synopsis show mac access-group [interface port-channel number | tengigabitethernet slot/port | vlan

vlan_id]

Operands interface Specifies the interface for which to display the MAC ACL mapping.

port-channel number

Specifies the port-channel number. The range of valid values is 1–63.

tengigabitethernet Specifies a valid 10 Gbps Ethernet interface.

slot Specifies a valid slot number.

port Specifies a valid port number.

vlan vlan_id Specifies the VLAN number. The range of valid values is 1-3583.

Defaults There are no default configurations for this command.

Description Use this command to display the current MAC ACL mapping to interfaces.

Usage

Guidelines

If you do not specify an interface, this command shows the mapping of MAC ACL to all interfaces.

Examples To display the current MAC ACL mapping for interface tengigabitethernet 0/1:

switch#show mac access-group interface tengigabitethernet 0/1

Interface Te 0/1

Inbound access-list is std_acl

To display the current MAC ACL mapping for interface VLAN 100:

switch#show mac access-group interface vlan 100

Interface Vl 100

Inbound access-list is ext_acl

To display the current MAC ACL mapping for interface tengigabitethernet 0/7 where there is no ACL

applied:

switch#show mac access-group interface tengigabitethernet 0/7

Interface Te 0/7

Inbound access-list is not set

See Also show running-config, show statistics