HP 2310mfa/2310mfd LCD Multifunction Monitors (MF User Guide
© 2009, 2010 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
TABLE OF CONTENT FOR YOUR SAFETY..............................................................................................................................3 PRECAUTIONS AND REMINDERS.................................................................................................4 IMPORTANT SAFETY INSTRUCTIONS.........................................................................................5 PACKAGE CONTENTS............................................................................................
LEGAL NOTICES................................................................................................................................ 32 TECHNICAL SPECIFICATIONS..................................................................................................... 33 TROUBLESHOOTING...................................................................................................................... 36 TIPS.................................................................................................
SYMBOL SA 1965 SA 1966 SYMBOL DEFINITION DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.
PRECAUTIONS AND REMINDERS Place unit on even surfaces. Unplug immediately if other foreign materials are put inside MFM box or if the MFM fell down. Do not cover or block any vents and openings. Inadequate ventilation may shorten the life of the display unit and cause overheating. Unplug immediately if there is malfunction such as no picture, no video/audio, smoke and bad odor from MFM. Prohibit/Avoid opening MFM cabinet. Avoid direct sunlight, dusty, high humidity and smoky areas.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
21. Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. 22. Power Lines – An outdoor antenna should be located away from power lines. 23. Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the antenna system is grounded to provide some protection against voltage surges and built up static charges. Section 810 of the National Electric Code, ANSI/NFPA No.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. LCD panel The LCD panel used in this product is mode of glass. Therefore, it can break when the product is dropped or impacted upon by other objects. The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
SETTING UP THE MFM PREPARING THE MFM FOR WALL MOUNTING IMPORTANT: Do not apply pressure to the screen display area, which may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installation. Place the MFM at least 2.36 inches (60 mm) from the wall to prevent cable interference. Before mounting your MFM on the wall, you need to remove the base. For your safety, please use listed wall mount bracket with minimum weight of the MFM without stand.
3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). SELECTING A GOOD LOCATION Please make sure to connect the power plug to the wall outlet socket after connecting the MFM to the power cord! 1. Install the base stand; place the MFM on a solid surface. Min 1m 4. Power: Insert the power cord in the wall socket with AC power supply.You can see LED states at the front panel. If the LED colour is Green, the MFM set power is on.
INSTALLING THE MONITOR DRIVER DOWNLOADING UPDATED DRIVERS FROM THE INTERNET The CD that is included with the MFM contains the monitor driver that you can install on your computer. To download the latest version of drivers and software files from the HPSupport site: 1. 2. 3. 4. 5. Refer to: http://www.hp.com/support. Select your country/region. Select Download Drivers and Software. Enter the model number of your monitor. The software-download pages for your monitor are displayed. 6.
LOCATING THE MFM CONNECTORS AND CONTROLS Before connecting any external equipment to the monitor, turn off all main power switches on the external equipment. If there is no switch, remove the main power plug from the wall socket. Connect the power cord into the AC IN socket found at the back of the MFM. NOTE: • Please use the power cord (included) with a grounded (earthed) pin and two flat current-carrying pins. Use only the power cord received with this monitor.
DTV Connectors 2 3 HDMI2 RGB/PC COMPONENT Y VIDEO Pb 6 VIDEO R L AV OUT 7 Pr AV IN 1 VIDEO HDMI1 AC IN L R 10 TV L R (COAXIAL) (OPTICAL) SERV.C 4 5 8 9 1. HDMI1, 2 (input terminals) — High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device ( page 16-17). 2. PC input terminal — For use when connecting a personal computer (PC) ( page 17). 3.
FRONT PANEL CONTROLS 1 2 3 4 5 6 7 1 VOL + VOL +: Press to increase the sound volume level. 2. VOL - VOL - : Press to decrease the sound volume level. 3. CH ▲ CH ▲: Press to select the next higher Programme number. 4. CH ▼ CH ▼: Press to select the next lower Programme number. 5. MENU Menu Button: Press to open or exit the OSD (on-screen display) menu. 6. INPUT Input Button: Press to select the input source. 7. i POWER Power Button: Press to turn on/off (standby) the MFM set.
USING THE REMOTE CONTROL POWER Press to turn ON/OFF (standby) the MFM. DUAL Press to select from mono, stereo, or TV channel. SOURCE Press repeatedly to choose the various input sources. Number buttons Press to enter TV channel number to select channel. SOUND Press to choose from Personal, Standard, News, or Movie. PICTURE Press to choose the Smart Picture mode from Personal,Vivid, Standard, Movie, Game, or Eco. EPG Press to display the Electronic Programme Guide.
TELETEXT Press to display or close the Teletext. MIX Display the Teletext with TV. SIZE Press to change the font size: Full screen, Top half and Bottom half. SUBPAGE Display the sub page (when available). INDEX Press to return to page 100 or the index page. SUBTITLE • In TV mode: It works only for turning on the subtitle and change to the next page marked as subtitle. • In Text mode: Select the next page marked as a subtitle page and request it as the display page. HOLD Press to stop the scrolling of pages.
VIEWING MODE ILLUSTRATIONS Normal Mode The original content would be at the centre of the screen. 16:9 Content 4:3 Content Wide Mode The original content in this mode has to fill the entire screen of the display. 16:9 Content 4:3 Content ZOOM Mode For those wide format images which are originally programmed into 4:3 frames with black bars around, this mode would stretch the image in both width and height for full display with active data.
CONNECTING TO THE MFM • T he unauthorized recording of television programmes, DVDs, video tapes and other materials may infringe upon the provisions of copyright law. • The COMPONENT VIDEO INPUT consists of three component video signals (Y, Pb, Pr) and provides the best picture performance. These terminals can only be used with component video compatible equipment such as a DVD video player. • Additional equipment and cables shown are not supplied with this monitor.
Connecting an amplifier equipped with a Dolby Digital decoder Connecting an amplifier equipped with an MPEG decoder ATV Connection ATV Connection Amplifier equipped with Dolby Digital decoder Amplifier equipped with MPEG decoder To Coaxial Type digital audio input To Coaxial Type digital audio input Coaxial digital cable (not supplied) Coaxial digital cable (not supplied) To Digital Audio output terminal To Digital Audio output terminal DTV Connection DTV Connection Amplifier equipped with Dolby
Connecting an amplifier equipped with a digital audio (optical or coaxial) input SIDE CONNECTIONS ATV Connection example TV side view EAR PHONE SERVICE ONLY ATV Connection Mini Stereo Plug DVD video player (with composite video outputs) VIDEO L - AUDIO - R Amplifier equipped with digital audio input decoder HDMI 2 S-VIDEO To Coaxial Type digital audio input Coaxial digital cable (not supplied) DTV Connection example L - AUDIO - R TV side view DVD video player (with composite video outputs)
CONNECTING AN HDMI OR A DVI DEVICE CONNECTING AN HDMI DEVICE One HDMI cable (type A connector) NOTE: • When turning on your electronic components, turn on the MFM first, and then the HDMI or DVI device. • When turning off your electronic components, turn off the HDMI or DVI device first, and then the MFM. • This MFM may not be compatible with features and/or specifications that may be added in the future.
CONNECTING A DVI DEVICE CONNECTING A COMPUTER One HDMI(type A connector)-to DVI adapter cable (not provided with MFM) and audio cables An analogue RGB (15 pin) computer cable can be connected.
USING THE OSD MENUS • A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured depending on some signals. This is not the malfunction. • If the edges of the picture are stretched, readjust the picture position adjustments in the PC of PICTURE menu. • Depending on the specification of the PC you are playing the DVD-Video on, and the DVD’s title, some scenes may be skipped, or you may not be able to pause during multiangle scenes. FOR ATV MODEL 1.
3. Press ▲ ▼ ◄ ► to select one of the following picture settings. • Smart picture: Accesses pre-defined smart picture settings. • Backlight: Adjusts the backlight brighter or darker. • Contrast: Changes the level of bright parts in the picture keeping the dark parts unchanged. • Brightness: Changes the level of light in the picture. • Colour: Changes the level of saturation. • Hue: Compensates colour variations in NTSC encoded transmissions. • Sharpness: Changes the level of sharpness of fine details.
3. Press ▲ ▼ ◄ ► to select one of the following sound settings. • Smart sound: Accesses pre-defined smart sound settings. • Bass: Adjusts the bass value to fit your best. • Treble: Adjusts the treble value to fit your best listening. • Volume: Adjusts the volume. • Balance: Sets the balance of the left and right speakers to best fit your listening. • Dual I-II: Selects between audio languages if dual sound is broadcast. • Mono/Stereo: Selects between mono or stereo if stereo is broadcast.
Automatically switch the TV on (On timer) On timer switches the TV to a specified channel at a specified time from standby. 7. Enter your current code using the Numeric buttons. If the code is validated, a new dialogue box will prompt you to enter your new code. 8. Enter the new code using the Numeric buttons. A message appears prompting you to enter the new code again for confirmation. NOTE • If you forget your code, enter ‘8888’ to override any existing codes. Press MENU. Select Features ► On timer.
•• INSTALLATION Step 2 Install Channels Select your country for proper channel installation. Install channels 1. Press MENU. 2. Select Installation ► Channel install ► Channel assistant. The first time you set up your TV, you are prompted to select a menu language and to install TV. This chapter provides instructions on how to reinstall and fine tune channels. Automatically install channels Picture This section describes how to search and store channels automatically.
9. Press ◄ ► to select Yes and press OK to store the new channel. 10. Press MENU to exit. Manually install channels This section describes how to search and store analogue TV channels manually. Fine tune analogue channels You can manually fine tune analogue channels when reception is poor. 1. Press MENU. 2. Select Installation ► Channel install ► Analogue: Manual. The Analogue: Manual menu appears. 3. Press ▲ ▼ to select the item you want to adjust.
Rename channels FOR DTV MODEL Channels can be renamed so that a name of your choice appears whenever the channel is selected. 1. Press the MENU/EXIT button to display or close the main menu. 2. Use the Navigation Ring to move around to select, adjust or confirm an item in the OSD (On Screen Display) menu. Press the MENU/EXIT button to enter the main OSD. Adjust the items including Picture, Sound, TV, Features, and Parental.
•• SOUND MENU 8. Advanced Video: • DNR - To filter out and reduces the image noise and improve picture quality. Select the effect degrees from Off, Low, Middle, High, or Auto. • Flash Tone - To adjust the skin colour to be more natural. • Back Light - To make the background colour brighter or darker. • DCR - Dynamic Contrast Ratio (DCR) auto adjusts the brightness of the screen to show more depths in the darker areas. • HDMI Mode - (HDMI only) User can select Auto/graphic/Video mode.
•• TV MENU • Channel sort - Changes the order of the Channel List. • Channel Edit - Enters the Channel Edit in the channels submenu to edit the channel number and channel name by using the number buttons 0~9. Note: • The following RC number-mapping table will not be shown on the MFM screen. The TV menu provides channel selection features. Picture Sound Channels Subtitle Teletext TV Features Parental OK Enter Select EXIT RC Watch TV 1. Country: To select the relevant country.
•• FEATURES MENU •• PARENTAL MENU The Features menu in TV mode, shown below, gives the most flexibility for general demands. The various requirements in different source modes, allow some features to be hidden (disable) on the menu. The Parental Menu enables and defines parental controls for the MFM.
LEGAL NOTICES Canadian notice Regulatory Notices – Federal Communications Commission Notice This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TECHNICAL SPECIFICATIONS Acceptable Video signals through HDMI terminals Format 480i Resolution 720 x 480i V. Frequency 60.000Hz H. Frequency 15.734kHz Pixel Clock Frequency 27.000MHz 480p 720 x 480p 60.000Hz 31.500kHz 27.000MHz /27.030MHz 576i 720 x 576i 50.000Hz 15.625kHz 27.000MHz 576p 720 x 576p 50.000Hz 31.250kHz 54.000MHz 720p 1280 x 720p 50.000Hz 37.500kHz 74.250MHz 720p 1280 x 720p 59.940 Hz / 60.000Hz 44.960kHz / 45.000kHz 74.170MHz /74.250MHz 1080i 1920 x 1080i 59.
Analogue TV Model Specifications Input/Output terminals Model 2310TV (1) Power source 220 V-240 V AC, 50 Hz Power consumption 2310TV: 65W (2) Standby (approx.) 0.5W Input RCA Component Video RCA Composite Video Audio : RCA Input RCA/Mini-Din(4 pin) Composite Video(CVBS) +S-video Audio : RCA Dimensions 560.3cm(W) 399.3cm(H) 175.4cm(D) TV Mass (Weight) 5.15 kg RGB/PC Net (Weight without stand) 5.
Digital TV Model Specifications Aspect ratio 16 : 9 Model 2310TV Visible size (diagonal) 477.41x268.41mm Power source 220 V-240 V AC, 50 Hz Number of pixels 1,920 (H) dots x 1,080 (V) dots Power consumption 2310TV: 65W Sound output (at 10 % distortion) 3W + 3W Standby (approx.) 0.5W Headphone socket R3.5mm stereo. Dimensions 560.3cm(W) 399.3cm(H) 175.4cm(D) Input/Output terminals Mass (Weight) 5.15 kg (1) Net (Weight without stand) 5.
TROUBLESHOOTING Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow “Ghost ” or double image • This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture.
Online Technical Support For the online access to technical support information, self-solve tools, online assistance, community forums of IT experts, broad mutlivendor knowledge base, monitoring and diagnostic tools, go to http://www.hp.com/support. Preparing to Call Technical Support If you cannot solve a problem using the trouble shooting tips in this section, you may need to call technical support.
