Fabric OS FCIP Administrators Guide v6.4.0 (53-1001766-01, November 2010)

34 Fabric OS FCIP Administrator’s Guide
53-1001766-01
Configuration steps
2
Minimum retransmit
time
-m The minimum retransmit time, in
milliseconds. The range of valid values is
20 through 5,000 ms and the default is
100 ms.
failover/standby metric -x You can configure standby circuits by
assigning a metric. Refer to “FCIP circuit
failover capabilities” on page 12 for a
description of circuit failover and the use
of standby circuits.
VLAN Tagging -v --<vlan_tag>
--l2cos-f-class
--l2cos-high
--l2cos-medium
--l2cos-low
Applies a VLAN tag to a circuit and sets a
specific layer two class of service. Refer
to “QOS, DSCP, and VLANs” on page 16
for information about VLAN tagging.
DSCP Tagging
- -dscp-f-class <n>
- -dscp-high <n>
- -dscp-medium <n>
- -dscp-low <n>
Applies a DSCP tag to a circuit. Refer to
“QOS, DSCP, and VLANs” on page 16 for
information about DSCP tagging.
TABLE 5 Circuit options
Option Argument Disruptive Description