Fabric OS FCIP Administrators Guide v6.4.0 (53-1001766-01, November 2010)

18 Fabric OS FCIP Administrator’s Guide
53-1001766-01
QOS, DSCP, and VLANs
2
The following example creates an additional FCIP circuit with a different VLAN tag.
switch:admin> portcfg fcipcircuit 16 create 1 192.168.2.21 192.168.2.11 100000
-v 200
Operation Succeeded
The following example shows a fcipcircuit modify command that changes the vlan tag and l2cos
levels for circuit 0. Parameters are the same for both the create and modify options.
switch:admin> portcfg fcipcircuit 16 modify 0 -v 300 --l2cos-f-class 7
--l2cos-high 5 --l2cos-medium 3 --l2cos-low 1
!!!! WARNING !!!!
Modify operation can disrupt the traffic on the fcipcircuit specified for a
brief period of time. This operation will bring the existing circuit down (if
circuit is up) before applying new configuration.
Continue with Modification (Y,y,N,n): [ n] y
Operation Succeeded
The following example shows a fcipcircuit modify command that changes the DSCP values for
circuit 0. Parameters are the same for both the create and modify options.
switch:admin> portcfg fcipcircuit 16 modify 0 --dscp-f 32 --dscp-h 16 --dscp-m
8 --dscp-l 4
Operation Succeeded
The following example shows the use of the portshow command to display the tunnel and circuit
values. Use the -c option as shown to include circuit values.
switch:admin> portshow fciptunnel 16 -c
-------------------------------------------
Tunnel ID: 16
Tunnel Description:
Admin Status: Enabled
Oper Status: In Progress
Compression: Off
Fastwrite: Off
Tape Acceleration: Off
TPerf Option: Off
IPSec: Disabled
Remote WWN: Not Configured
Local WWN: 10:00:00:05:1e:c3:f0:16
Peer WWN: 00:00:00:00:00:00:00:00
Circuit Count: 2
Flags: 0x00000000
FICON: Off
-------------------------------------------
Circuit ID: 16.0
Circuit Num: 0
Admin Status: Enabled
Oper Status: In Progress
Remote IP: 192.168.2.20
Local IP: 192.168.2.10
Metric: 0
Min Comm Rt: 100000
Max Comm Rt: 100000
SACK: On
Min Retrans Time: 100
Max Retransmits: 8