DCFM Installation, Migration, and Transition Guide - Supporting DCFM 10.3.x (53-1001360-01, October 2009)

230 DCFM Installation, Migration, and Transition Guide
53-1001360-01
Fabric Manager to DCFM command mapping
3
Fabric Management > Fabric
Merge
<none> Not implemented.
Fabric Management > Fabrics
Merge Check
<none> Not implemented.
Fabric Management >
Manage Security
<none> Not implemented.
Fabric Management > Change
Seed Switch
Discover > Setup > Change Seed
Switch
No change.
FC Router Management > FC
Router Configuration
Configure > Routing
Configuration
No change.
FC Router Management >
Share Devices
Configure > Zoning
FC Router Management >
Diagnose Fabric Device
Sharing
Configure > FC Troubleshooting >
Fabric Device Sharing
No change.
Switch Management > Import
License from File
<none> Not implemented.
Switch Management > Load
License from Switch
<none> Not implemented.
Switch Management > Add
License Key
<none> Not implemented.
Switch Management > Set
Admin Password
<none> Not implemented.
Switch Management > Launch
Fabric Watch Configuration
Launch from the switch view,
from right click on switch in
Connectivity Map.
Switch Management > Launch
Switch Admin
Right click on device in
Connectivity Map or Product Tree
or double click on the device in
Topology
Switch Management > Show
FC Port Connectivity View
Monitor > Port Connectivity
Switch Management > ACL
Management
<none> Not implemented.
Device Management and
Troubleshooting > Import
Device Node / Port Names
<none> Not implemented.
Device Management and
Troubleshooting >Device
Connectivity and
Troubleshooting
Configure > FC Troubleshooting >
Device Connectivity
No change.
Device Management and
Troubleshooting > Trace Route
Configure > FC Troubleshooting >
Trace Route
No change.
FCIP Configure > FCIP Tunnel No change.
SYSLOG Configuration Monitor > Syslog Configuration No change.
TABLE 22 Fabric Manager to DCFM command mapping
Menu Fabric Manager DCFM Comments