Brocade Fabric Watch Administrator's Guide v6.3.0 (53-1001342-01, July 2009)

48 Fabric Watch Administrator’s Guide

53-1001342-01

Threshold configuration

Index ThresholdName BehaviorType BehaviorInt

216 eportRXPerf216 Triggered 1

217 eportRXPerf217 Triggered 1

218 eportRXPerf218 Triggered 1

219 eportRXPerf219 Triggered 1

220 eportRXPerf220 Triggered 1

221 eportRXPerf221 Triggered 1

222 eportRXPerf222 Triggered 1

223 eportRXPerf223 Triggered 1

Threshold boundary level is set at : Custom.

4. Type 9 at the Select choice => prompt to apply the custom value.

1 : change behavior type 11 : change threshold alarm level

2 : change behavior interval 12 : change changed alarm

3 : change threshold boundary level 13 : change belowalarm

4 : change custom unit 14 : change abovealarm

5 : change custom timebase 15 : change inBetween alarm

6 : change custom low 16 : apply threshold alarm changes

7 : change custom high 17 : cancel threshold alarm changes

8 : change custom buffer 18 : return to previous page

9 : apply threshold boundary changes

10 : cancel threshold boundary changes

Select choice => : (1..18) [18]9.

5. Type 16 at the Select choice => prompt to apply the changes.