Brocade Fabric Watch Administrator's Guide v6.3.0 (53-1001342-01, July 2009)

44 Fabric Watch Administrator’s Guide

53-1001342-01

Threshold configuration

Enabling a threshold

1. Type 3 at the Select choice => prompt.

The system generates output similar to that in the system output below, but the output you see

varies based on the class and area you selected.

2. Type the index number of the element for which Fabric Watch should enable monitoring.

Fabric Watch redraws the element table with the selected element enabled. A second row of

information about the selected element appears, and the status of the element is set to

enabled.

Select threshold index => : (216..223) [216] 218

Index ThresholdName Port CurVal Status

LastEvent LasteventTime LastVal LastState

=============================================================================

216 eportRXPerf216 8/24 0 Percentage(%)/min enabled

inBetween Fri Oct 21 14:21:01 2005 0 Percentage(%)/min Informative

217 eportRXPerf217 8/25 0 Percentage(%)/min enabled