Brocade Fabric Watch Administrator's Guide v6.3.0 (53-1001342-01, July 2009)

82 Fabric Watch Administrator’s Guide
53-1001342-01
System monitoring using the sysMonitor command
11
where:
--config Configures the system’s CPU or memory usage monitoring parameters.
mem Configures the system’s memory usage monitoring parameters.
poll|retry|limit|action
• poll - Specifies the polling interval. The valid values are between 10
seconds and 60 seconds. The default value is 10.
• retry - Specifies the number of retries before Fabric Watch takes action.
The default value is three.
• limit - Specifies the high threshold. The valid values are 0 to 100% and
the default value is different for different systems.
• action - Specifies the action to be taken if the system crosses the
threshold. Valid values are snmp and raslog. The default value is none.
cpu Configures the system’s CPU monitoring parameters.
poll|retry|limit|action
• poll - Specifies the polling interval. The valid values are between 10
seconds and 60 seconds. The default value is 10.
• retry - Specifies the number of retries before Fabric Watch takes action.
The default value is three.
• limit - Specifies the high threshold. The valid values are 0 to 100% and
the default value is different for different systems.
• action - Specifies the action to be taken if the system crosses the
threshold. Valid values are snmp and raslog. The default value is none.
--show Displays the system’s CPU or memory usage.
mem Displays the system’s memory usage.
cpu Displays the system’s CPU usage.