Brocade Fabric Watch Administrator's Guide v6.3.0 (53-1001342-01, July 2009)

Fabric Watch Administrator’s Guide 81
53-1001342-01
Chapter
11
System monitoring
In this chapter
•System monitoring using the sysMonitor command. . . . . . . . . . . . . . . . . . . 81
System monitoring using the sysMonitor command
The sysMonitor command enables you to manage your system’s memory or CPU usage. To execute
this command, you must have chassis-level permission in a virtual fabric (VF) environment.
System monitoring is disabled by default. You must run both the --config -mem and the --config -cpu
commands to enable both memory and CPU system monitoring.
Configuring system monitoring
1. Connect to the switch and log in as admin.
2. Enter the sysMonitor command to display the list of operands.
The sysMonitor menu displays.
switch:admin > sysMonitor
sysMonitor --config <mem | cpu>
[-poll <pollingInterval>]
[-retry <noOfRetries>]
[-limit <high usage limit>]
[-action [raslog], [snmp]| none]
sysMonitor --show <mem | cpu>