Brocade Fabric Watch Administrator's Guide v6.3.0 (53-1001342-01, July 2009)

Fabric Watch Administrator’s Guide 55
53-1001342-01
Fabric Watch notification
6
DefaultCustom
Unit Percentage(%) Percentage(%)
Time base minuteminute
Low 0 0
High 100 80
BufSize 0 0
Threshold alarmlevel is set at: Custom
.
.
.
3. Type 16 at the Select choice => prompt to apply the threshold alarm level changes. Unless you
apply the value, it does not take effect.
1 : change behavior type 11 : change threshold alarm level
2 : change behavior interval 12 : change changed alarm
3 : change threshold boundary level 13 : change belowalarm
4 : change custom unit 14 : change abovealarm
5 : change custom timebase 15 : change inBetween alarm
6 : change custom low 16 : apply threshold alarm changes
7 : change custom high 17 : cancel threshold alarm changes
8 : change custom buffer 18 : return to previous page
9 : apply threshold boundary changes
10 : cancel threshold boundary changes
Select choice => : (1..18) [18]16
E-mail notification configuration
In environments where it is critical that you are notified about errors quickly, you might want to use
e-mail notifications. With e-mail notifications, you can be notified of serious errors by e-mail or a
pager, so you can react quickly.
Configuring e-mail notifications in a Telnet session
To configure e-mail notifications in a Telnet session, enter the fwMailCfg command at the prompt.
The fwMailcfg menu displays.
1 : Show Mail Configuration Information
2 : Disable Email Alert
3 : Enable Email Alert
4 : Send Test Mail
5 : Set Recipient Mail Address for Email Alert
6 : Relay Host IP Configuration
7 : Quit
Select an item => : (1..7) [7]