Brocade Fabric Watch Administrator's Guide v6.3.0 (53-1001342-01, July 2009)
Fabric Watch Administrator’s Guide 97
53-1001342-01
Class default settings
B
VE_Port class default settings
Table 20 provides default settings (per minute) for areas in the VE_Port class.
Link Failure Count Monitors the
number of link
failures
Unit: Errors
Time Base: minute
Low: 0
High: 500
Buffer: 50
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Out_of_range
In_range
Loss of Signal Count Monitors the
number of signal
loss errors
Unit: Errors
Time Base: minute
Low: 0
High: 5
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Out_of_range
In_range
Link Reset Monitors the
number of link
resets sent by a
given port (LR-Out)
and received on a
given port (LR-In).
Unit: Errors
Time Base: minute
Low: 0
High: 500
Buffer: 50
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Out_of_range
In_range
Primitive Sequence
Protocol Error
Monitors the
number of primitive
sequence errors
Unit: Errors
Time Base: minute
Low: 0
High: 5
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Out_of_range
In_range
Trunk Utilization The percent of
utilization for the
trunk at the time of
the last poll.
Unit: Percentage (%)
Time Base: minute
Low: 0
High: 100
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Informative
Informative
TABLE 23 Port class default settings
Area Description Default threshold
settings
Default alarm settings Threshold state
Packet Loss The number of
packets routed
through a port
exceeds the port
bandwidth.
Unit: Errors
Time Base: minute
Low: 0
High: 10
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Out_of_range
In_range
State Changes Monitors state
changes
Unit: Changes
Time Base: minute
Low: 0
High: 50
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Out_of_range
In_range
Utilization The percent of
utilization for the port
at the time of the last
poll.
Unit: Errors
Time Base: minute
Low: 0
High: 100
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Out_of_range
In_range
TABLE 22 FOP_Port class default settings (Continued)
Area Description Default threshold
settings
Default alarm settings Threshold state