Brocade Fabric Watch Administrator's Guide v6.3.0 (53-1001342-01, July 2009)

Fabric Watch Administrator’s Guide 91
53-1001342-01
Class default settings
B
Performance Monitor class default settings
Table 18 provides default settings for areas in the Customer-Defined Performance Monitor class.
Table 19 provides default settings for areas in the End-to-End Performance Monitor class.
TABLE 18 Customer-Defined Performance Monitor class default settings
Area Description Default threshold
settings
Default alarm settings Threshold state
Customer-Defined
Filter
Monitors the number
of frames that are
filtered out by the port
Unit: Frames
Time Base: none
Low: 0
High: 0
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Informative
Informative
TABLE 19 End-to-End Performance Monitor class default settings
Area Description Default threshold
settings
Default alarm settings Threshold state
End-to-End Invalid
CRC Count
Monitors the number
of CRC errors
between a SID_DID
pair in a port
Unit: Errors
Time Base: minute
Low: 1
High: 10
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Out_of_range
In_range
End-to-End Receive
Performance
Monitors the
receiving traffic
between a SID_DID
pair in a port
Unit: KBps
Time Base: none
Low: 0
High: 0
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Informative
Informative
End-to-End Transmit
Performance
Monitors the transmit
traffic between a
SID_DID pair in a port
Unit: KBps
Time Base: none
Low: 0
High: 0
Buffer: 0
Changed: 0
Below: 0
Above: 0
In-Between: 0
Informative
Informative
Informative
Informative